Certifications: EN 1090-2 EXC3, EN ISO 3834-2, PED, ISO 9001/14001
First In Service operates to ISO 9001, ISO 14001, EN ISO 3834-2, EN 1090-2 in execution class EXC3, and PED 2014/68/EU. Structural welding is certified by TÜV Eesti OÜ, Notified Body 1526, under certificate 1526-CPR-1090-1.0173.TÜVEESTI.2026.000. Every batch carries material certificates to EN 10204 3.1 or 3.2 together with NDT reports.
Key takeaways
- Welding and structural steel: EN 1090-2 up to execution class EXC3 (TÜV Eesti OÜ, Notified Body 1526, certificate 1526-CPR-1090-1.0173.TÜVEESTI.2026.000) and EN ISO 3834-2 (certificate WQMS154/2026).
- Pressure equipment: welding manufacturer approval under PED 2014/68/EU, Annex I, point 3.1, for pressure vessels (EN 13445) and piping (EN 13480), certificate PEDWQMS154/2026.
- Management systems: ISO 9001:2015 and ISO 14001:2015, certified by Bureau Veritas (certificates EE007273 and EE007274, valid until 24 June 2027).
- Documentation: NDT reports (VT, PT, MT, UT, RT) from certified partners and EN 10204 3.1 material certificates (3.2 on request) with every batch.
Our certificates
Quality management
Systematic quality across all operations
Environmental management
Minimising environmental impact
Welding quality
Comprehensive quality requirements for fusion welding
Structural steel
Execution of steel structures
Pressure equipment
EU conformity for pressure components
What each standard means for your order.
Procurement teams increasingly search by standard rather than by service, because the standard is what the audit checks. Here is what each of ours covers and what it changes in the documentation you receive.
Unsure which standards your scope requires? Send the drawing and an engineer will tell you what applies and what it costs.
What the certificates say
Transcribed from the certificates themselves, so every claim below can be checked against the issuing body.
Manufacturing of structural steel components up to EXC 3 according to EN 1090-2.
Certificate no. 1526-CPR-1090-1.0173.TÜVEESTI.2026.000 · valid until 24 October 2029 · issuing body
Verified and recognized as welding workshop in the product range of manufacturing of welded steel constructions, based on the requirements of the standard EVS-EN ISO 3834-2:2021.
Certificate no. WQMS154/2026 · valid until 24 October 2029 · issuing body
Quality management system welding manufacturer according to Directive 2014/68/EU, Annex I, point 3.1. Scope: Pressure vessels (EN 13445), Pipings (EN 13480).
Certificate no. PEDWQMS154/2026 · valid until 24 October 2029 · issuing body
Primary sources: EN 1090-2 · EN ISO 3834-2 · PED 2014/68/EU · EN 10204 · NORSOK M-501
Share your technical requirements with our engineers. We will send a firm quote within five working days.
Request a quoteDownload capability overview (PDF)First In Service in numbers
| Capability | Figure |
|---|---|
| Experience | Manufacturing since 2002; First In Service OÜ registered in 2010 |
| Facility | 18,000 m² (194,000 sq ft) single-site workshop, Valukoja 12, Tallinn, Estonia |
| Maximum product | 35 × 7 × 7 m (L × W × H), 160 tonnes (353,000 lb) |
| Vertical turning | Up to Ø 2,700 mm (106 in) and 1,900 mm (75 in) high (SC27 lathe) |
| Milling and boring | Housings and frames up to 13,000 mm (512 in) long and 4,500 mm (177 in) high (FERMAT WRF 130, X 13,500 mm) |
| Shafts | Up to 3,250 mm (128 in) long and Ø 1,000 mm (PUMA 700LY II) |
| Impellers | Up to Ø 4,000 mm (157 in); above Ø 2,700 mm finish-machined on the FERMAT WRF 130 |
| Dynamic balancing | 25–4,000 kg (55–8,800 lb), up to Ø 4,000 mm (157 in); smallest measurable unbalance 0.1 g |
| Tolerance | Down to ±0.02 mm (±0.0008 in) |
| Welding | 135/136, TIG, SAW for plate 100 mm and thicker; EN ISO 3834-2, EN 1090-2 EXC3 |
| Stress relieving | Post-weld heat treatment (PWHT), routine for welded parts; done at our site with heat-treatment partners |
| Pressure equipment | PED 2014/68/EU (Annex I 3.1 welding approval); EN 13445-4, EN 13480-4 |
| Surface treatment | Shot-blasting and coating to NORSOK M-501 and C5-M, in-house and with certified partners |
| Materials | Carbon steel, stainless steel, duplex, super duplex, Inconel, Hastelloy, titanium |
| Quality and documentation | ISO 9001, ISO 14001; EN 10204 3.1 certificates (3.2 on request); NDT (VT, PT, MT, UT, RT) by certified partners |
| Grinding and polishing | By certified partners, within the same order |
| Logistics | Muuga Harbour 20 km, Paldiski Port 60 km, heavy-haul road access |
| Response time | Engineer reply within 1 working day; firm quote within 5 working days |
Questions buyers ask
What certifications does First In Service hold?
ISO 9001 (quality management), ISO 14001 (environmental management), EN ISO 3834-2 (welding quality), EN 1090-2 (structural steel execution), and PED 2014/68/EU (pressure equipment).
What does EN ISO 3834-2 certification cover?
Comprehensive quality requirements for fusion welding of metallic materials — the highest of the three EN 3834 levels, covering welding procedures, personnel qualification, and process control.
What does EN 1090-2 certification cover?
Execution of steel structures — the technical requirements for structural steelwork placed on the European market.
Is First In Service PED certified?
Yes. First In Service holds a welding manufacturer approval under PED 2014/68/EU, Annex I, point 3.1, from TÜV Eesti OÜ (certificate PEDWQMS154/2026), covering pressure vessels to EN 13445-4 and piping to EN 13480-4. Pressure equipment is manufactured to PED 2014/68/EU, with the conformity assessment route defined by the equipment category.
How is NDT handled at First In Service?
Non-destructive testing (VT, PT, MT, UT, RT) is performed by certified partners, giving independent verification of every critical weld rather than in-house self-inspection.
Can the certificates be verified independently?
Yes. Certificate numbers and issuing bodies are listed on this page, and can be checked against the certification registries directly.
Published by First In Service OÜ, Tallinn · · Reviewed by Madis Kollo, Head of Sales & Business Development