About us

About First In Service OÜ

First In Service OÜ is an Estonian contract manufacturer and heavy engineering subcontractor at Valukoja 12, Tallinn. Our manufacturing experience goes back to 2002, and the company was registered in 2010. Fabrication, machining and assembly share one 18,000 m² site, so a 160-tonne structure is welded, machined and documented without leaving the yard.

Key takeaways

  • Who we are: an Estonian contract manufacturer and heavy engineering subcontractor at Valukoja 12, Tallinn; manufacturing experience since 2002, company registered in 2010.
  • One contract: cutting, welding, stress relieving, machining, assembly and FAT on one 18,000 m² site; NDT, grinding and polishing by certified partners and surface treatment in-house and with certified partners, all managed by us.
  • Size and logistics: parts up to 35 × 7 × 7 m and 160 t; Muuga Harbour 20 km, Paldiski Port 60 km, heavy-haul road access.
  • Certified: ISO 9001, ISO 14001, EN ISO 3834-2, EN 1090-2 EXC3 and a PED 2014/68/EU welding manufacturer approval.
  • Contact: an engineer replies within 1 working day; firm quote within 5 working days. We work in English, Finnish, Estonian and Russian.

Mission and vision

◎Our mission

To keep developing as a reliable contract manufacturer and heavy engineering subcontractor, delivering precision-welded, machined and assembled products for demanding industrial applications on time.

◈Our vision

To be the first-choice precision manufacturer in Northern Europe for clients whose equipment must not fail, known for documented process control, consistent quality and deep industry knowledge.

Outsourcing

Why outsource to First In Service

Outsourcing a large welded and machined part often means managing a fabricator, a machine shop, a heat-treatment shop and a coating hall, plus the transport and re-inspection between them. With First In Service those steps sit under one contract and one point of contact.

One contract from plate to FAT: cutting, welding, stress relieving, machining, assembly and factory acceptance testing in one order. NDT, grinding and polishing are done by certified partners, and surface treatment in-house and with certified partners, all managed by us.
One 18,000 m² site: fabrication, machining and assembly share one site in Tallinn, so a welded part is machined without being trucked between suppliers.
Answers on a known clock: an engineer replies within 1 working day, and a firm quote follows within 5 working days.
Documentation that travels with the part: EN 10204 3.1 material certificates (3.2 on request), NDT and dimensional inspection reports, and a Manufacturing Data Record for assemblies.
20 km to the ship: Muuga Harbour is 20 km away and Paldiski Port 60 km, with heavy-haul road access from the site.
Send a drawing →

Proven in demanding sectors

We are a specialised contract manufacturer and heavy engineering subcontractor delivering precision-welded, machined and assembled products for demanding industrial applications.

Early DFM review

Before we build to print, our production engineers carry out a Design for Manufacturability (DFM) review to find potential failure points, optimise welding sequences and reduce your overall manufacturing cost.

Certified quality systems

Our operations are certified to ISO 9001, ISO 14001, EN ISO 3834-2 and EN 1090-2, and our documentation complies with PED.

Full material traceability

We guarantee full material traceability from prototype to series production. Weld integrity is verified by NDT (VT, PT, MT, UT, RT) carried out by certified partners.

Scale and lifting capacity

With 18,000 m² of floor space and lifting capacity up to 160 tonnes, we can scale resources to your project timeline and handle very large components.

Heavy-haul port access

Our Tallinn site is 20 km from Muuga Harbour and 60 km from Paldiski Port, with direct heavy-haul road access that avoids city traffic. Oversized components up to 160 tonnes ship roll-on/roll-off to Europe and the Nordics.

Environmental responsibility

Waste, chemical safety and emissions are actively managed as part of our ISO 14001-certified operations.

Primary sources: EN 1090-2 · EN ISO 3834-2 · PED 2014/68/EU

Bring us your toughest tolerances.

Share your technical requirements with our engineers. We will send a firm quote within five working days.

Request a quoteDownload capability overview (PDF)
At a glance

First In Service in numbers

Key capabilities of First In Service OÜ, Tallinn, Estonia
CapabilityFigure
ExperienceManufacturing since 2002; First In Service OÜ registered in 2010
Facility18,000 m² (194,000 sq ft) single-site workshop, Valukoja 12, Tallinn, Estonia
Maximum product35 × 7 × 7 m (L × W × H), 160 tonnes (353,000 lb)
Vertical turningUp to Ø 2,700 mm (106 in) and 1,900 mm (75 in) high (SC27 lathe)
Milling and boringHousings and frames up to 13,000 mm (512 in) long and 4,500 mm (177 in) high (FERMAT WRF 130, X 13,500 mm)
ShaftsUp to 3,250 mm (128 in) long and Ø 1,000 mm (PUMA 700LY II)
ImpellersUp to Ø 4,000 mm (157 in); above Ø 2,700 mm finish-machined on the FERMAT WRF 130
Dynamic balancing25–4,000 kg (55–8,800 lb), up to Ø 4,000 mm (157 in); smallest measurable unbalance 0.1 g
ToleranceDown to ±0.02 mm (±0.0008 in)
Welding135/136, TIG, SAW for plate 100 mm and thicker; EN ISO 3834-2, EN 1090-2 EXC3
Stress relievingPost-weld heat treatment (PWHT), routine for welded parts; done at our site with heat-treatment partners
Pressure equipmentPED 2014/68/EU (Annex I 3.1 welding approval); EN 13445-4, EN 13480-4
Surface treatmentShot-blasting and coating to NORSOK M-501 and C5-M, in-house and with certified partners
MaterialsCarbon steel, stainless steel, duplex, super duplex, Inconel, Hastelloy, titanium
Quality and documentationISO 9001, ISO 14001; EN 10204 3.1 certificates (3.2 on request); NDT (VT, PT, MT, UT, RT) by certified partners
Grinding and polishingBy certified partners, within the same order
LogisticsMuuga Harbour 20 km, Paldiski Port 60 km, heavy-haul road access
Response timeEngineer reply within 1 working day; firm quote within 5 working days
FAQ

Questions buyers ask

When was First In Service founded?

Manufacturing experience dates from 2002; First In Service OÜ was registered in 2010. The company operates from Valukoja 12, Tallinn, Estonia.

What is First In Service's business model?

A single-site integrated contract manufacturer and heavy engineering subcontractor: fabrication, CNC machining and assembly in one building, under one contract and one quality system.

What makes First In Service different from other subcontractors?

Single-point accountability: fabrication, machining and assembly happen in one building, so one audit visit covers the core production chain, and partner work is managed under the same contract. Add to that a 160-tonne / 35-metre envelope and port access 20 km away.

Where does First In Service deliver?

Primarily the Nordic countries and the rest of Europe: Finland, Sweden, Norway, Denmark, Germany and the Netherlands. EU origin simplifies customs and content requirements.

Published by First In Service OÜ, Tallinn ·

In brief

160 tonnes. 35 metres. 20 km to the ship. Heavy fabrication, precision machining and mechanical assembly under a single contract. One supplier is responsible for the finished geometry and for the documentation that proves it.

At a glance