Machine park

Machine park: boring mills, CNC lathes & milling centres

The First In Service machine park in Tallinn covers heavy boring, turning and milling. The FERMAT WRF 130 floor-type boring mill has 13,500 mm of X-axis and 4,000 mm of Y-axis travel. Vertical turning lathes take parts up to Ø 2,700 mm. The PUMA 700LY II horizontal turning centre handles lengths up to 3,250 mm. A ZAYER XIOS 4000 milling machine completes the line-up, and 160 tonnes of lifting capacity serve them all.

Machines by type

Boring mills

FERMAT WRF 130
X=13,500 mm · Y=4,000 mm · Z=900 mm · W=730 mm · V=900 mm
Heavy-duty floor-type boring mill
FERMAT WRFT 130
X=4,200 mm · Y=2,500 mm · Z=2,100 mm · W=730 mm · V=900 mm
Table-type boring mill
FERMAT TK6513
X=3,500 mm · Y=2,000 mm · Z=1,600 mm · W=700 mm
Floor-type boring mill
MICROMILL HBM4
X=2,200 mm · Y=1,600 mm · Z=1,600 mm · W=500 mm
Horizontal boring mill

CNC milling machines

ZAYER XIOS 4000
X=4,000 mm · Y=1,500 mm · Z=1,400 mm
Bed-type CNC milling machine
CORREA A20
X=3,400 mm · Y=740 mm · Z=750 mm
CNC milling machine
WAGNER WMK 1400
X=1,400 mm · Y=800 mm · Z=700 mm
Vertical CNC milling machine

Vertical turning lathes

SC27 / Mitutoyo Linear Scales
Table Ø 2,500 mm · Max workpiece Ø 2,700 mm · Max height 1,900 mm
Heavy-duty VTL
TOS HULIN SKIQ 20
Table Ø 2,000 mm · Max workpiece Ø 2,300 mm · Max height 2,200 mm
VTL (since March 2026)
FERMAT AS20FFR3
Table Ø 1,600 mm · Max workpiece Ø 2,000 mm · Max height 1,200 mm
CNC vertical turning lathe

Horizontal lathes

PUMA 700LY II
Max length 3,250 mm · Max Ø 1,000 mm
CNC horizontal turning centre
Summary

In short

The First In Service machine park in Tallinn is built for large, heavy parts. The FERMAT WRF 130 floor-type boring mill mills and bores parts up to 13,000 mm long and 4,500 mm high. Vertical turning lathes turn parts up to Ø 2,700 mm. The PUMA 700LY II turns shafts up to 3,250 mm long and Ø 1,000 mm with live tooling. Impellers up to Ø 4,000 mm are finish-machined on the boring mill. Dynamic balancing covers parts from 25 to 4,000 kg and up to Ø 4,000 mm. Overhead cranes lift up to 160 tonnes. Fabrication, machining and assembly share one 18,000 m² workshop.

Bring us your toughest tolerances.

Share your technical requirements with our engineers. We will send a firm quote within five working days.

Request a quoteDownload capability overview (PDF)
At a glance

First In Service in numbers

Key capabilities of First In Service OÜ, Tallinn, Estonia
CapabilityFigure
ExperienceManufacturing since 2002; First In Service OÜ registered in 2010
Facility18,000 m² (194,000 sq ft) single-site workshop, Valukoja 12, Tallinn, Estonia
Maximum product35 × 7 × 7 m (L × W × H), 160 tonnes (353,000 lb)
Vertical turningUp to Ø 2,700 mm (106 in) and 1,900 mm (75 in) high (SC27 lathe)
Milling and boringHousings and frames up to 13,000 mm (512 in) long and 4,500 mm (177 in) high (FERMAT WRF 130, X 13,500 mm)
ShaftsUp to 3,250 mm (128 in) long and Ø 1,000 mm (PUMA 700LY II)
ImpellersUp to Ø 4,000 mm (157 in); above Ø 2,700 mm finish-machined on the FERMAT WRF 130
Dynamic balancing25–4,000 kg (55–8,800 lb), up to Ø 4,000 mm (157 in); smallest measurable unbalance 0.1 g
ToleranceDown to ±0.02 mm (±0.0008 in)
Welding135/136, TIG, SAW for plate 100 mm and thicker; EN ISO 3834-2, EN 1090-2 EXC3
Stress relievingPost-weld heat treatment (PWHT), routine for welded parts; done at our site with heat-treatment partners
Pressure equipmentPED 2014/68/EU (Annex I 3.1 welding approval); EN 13445-4, EN 13480-4
Surface treatmentShot-blasting and coating to NORSOK M-501 and C5-M, in-house and with certified partners
MaterialsCarbon steel, stainless steel, duplex, super duplex, Inconel, Hastelloy, titanium
Quality and documentationISO 9001, ISO 14001; EN 10204 3.1 certificates (3.2 on request); NDT (VT, PT, MT, UT, RT) by certified partners
Grinding and polishingBy certified partners, within the same order
LogisticsMuuga Harbour 20 km, Paldiski Port 60 km, heavy-haul road access
Response timeEngineer reply within 1 working day; firm quote within 5 working days
FAQ

Questions buyers ask

What machines does First In Service operate?

FERMAT WRF 130 and WRFT 130 boring mills and a ZAYER XIOS 4000 bed-type CNC milling centre. Turning runs on the SC27 vertical turning lathe and the PUMA 700LY II horizontal turning centre. A supporting machine park handles heavy components.

What is the largest machine in the workshop?

The FERMAT WRF 130 floor-type boring mill, with 13,500 mm of X-axis and 4,000 mm of Y-axis travel. It is built for the longest components and largest housings.

What is the maximum turning diameter?

Ø 2,700 mm on the SC27 vertical turning lathe. Larger impellers, up to Ø 4,000 mm, are finish-machined on the FERMAT WRF 130 boring mill. That mill also mills and bores parts up to 13,000 mm long and 4,500 mm high.

What lifting capacity does the workshop have?

Up to 160 tonnes overhead, matching the maximum fabricated product weight.

What tolerances can the machine park hold?

Down to ±0.02 mm on heavy components, verified with dimensional inspection reports per part or batch.

Can First In Service machine long shafts?

Shafts up to 3,250 mm long and Ø 1,000 mm are turned with live tooling on the PUMA 700LY II. Parts up to 13,000 mm long and 4,500 mm high are milled and bored on the FERMAT boring mills. That figure is a milling length, not a turning length.

Published by First In Service OÜ, Tallinn · · Reviewed by Madis Kollo, Head of Sales & Business Development

In brief

160 tonnes. 35 metres. 20 km to the ship. Heavy fabrication, precision machining and mechanical assembly under a single contract. One supplier is responsible for the finished geometry and for the documentation that proves it.

At a glance